for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 316 HMC558LC3B gaas mmic fundamental mixer, 5.5 - 14.0 ghz v02.1208 general description features functional diagram passive double balanced topology high lo/rf isolation: 45 db low conversion loss: 7 db wide if bandwidth: dc - 6 ghz 12 lead ceramic 3x3mm smt package: 9mm 2 electrical speci cations, t a = +25 c, if= 100 mhz, lo= +15 dbm* typical applications the HMC558LC3B is ideal for: ? point-to-point radios ? point-to-mulit-point radios ? test equipment & sensors ? military end-use the HMC558LC3B is a general purpose double balanced mixer in a leadless rohs compliant smt package that can be used as an upconverter or downconverter between 5.5 and 14 ghz. this mixer is fabricated in a gaas mesfet process, and requires no external components or matching cir- cuitry. the HMC558LC3B provides excellent lo to rf and lo to if isolation due to optimized balun structures and operates with lo drive levels as low as +9 dbm. the rohs compliant HMC558LC3B elim- inates the need for wire bonding, and is compatible with high volume surface mount manufacturing techniques. parameter min. typ. max. min. typ. max. units frequency range, rf & lo 5.5 - 10.0 10.0 - 14.0 ghz frequency range, if dc - 6 dc - 6 ghz conversion loss 7 9.5 8.5 10 db noise figure (ssb) 7 9.5 8.5 10 db lo to rf isolation 35 45 30 36 db lo to if isolation 20 25 20 25 db rf to if isolation 8 14 10 16 db ip3 (input) 20 24 dbm ip2 (input) 54 46 dbm 1 db gain compression (input) 11 13 dbm *unless otherwise noted, all measurements performed as downconverter, if= 100 mhz.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 317 conversion gain vs. temperature @ lo = +15 dbm conversion gain vs. lo drive isolation @ lo = +15 dbm if bandwidth @ lo = +15 dbm return loss @ lo = +15 dbm upconverter performance conversion gain vs. lo drive -20 -15 -10 -5 0 4 6 8 10 12 14 16 +25c +85c -40c conversion gain (db) frequency (ghz) -16 -12 -8 -4 0 4 6 8 10 12 14 16 +9 dbm +12 dbm +15 dbm +18 dbm +20 dbm conversion gain (db) frequency (ghz) -16 -12 -8 -4 0 4 6 8 10 12 14 16 +12dbm +15dbm +18dbm +20dbm conversion gain (db) frequency (ghz) -25 -20 -15 -10 -5 0 01234567 if conversion gain response (db) frequency (ghz) -60 -50 -40 -30 -20 -10 0 4 6 8 10 12 14 16 rf/if lo/rf lo/if isolation (db) frequency (ghz) -25 -20 -15 -10 -5 0 4 6 8 10 12 14 16 rf lo return loss (db) frequency (ghz) HMC558LC3B v02.1208 gaas mmic fundamental mixer, 5.5 - 14.0 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 318 mxn spurious outputs input ip2 vs. temperature @ lo = +15 dbm * input ip3 vs. lo drive * input ip3 vs. temperature @ lo = +15 dbm * input ip2 vs. lo drive * * two-tone input power = -10 dbm each tone, 1 mhz spacing. input p1db vs. temperature @ lo = +15 dbm nlo mrf01234 0xx-6221733 1100254951 27850825174 3 7878757578 4 7878787878 rf = 8.1 ghz @ -10 dbm lo = 8 ghz @ +15 dbm all values in dbc below the if output power level. 10 15 20 25 30 579111315 +9 dbm +12 dbm +15 dbm +18 dbm +20 dbm ip3 (dbm) frequency (ghz) 6 8 10 12 14 16 579111315 +25c +85c -40c p1db (dbm) frequency (ghz) 0 5 10 15 20 25 30 579111315 +25c +85c -40c ip3 (dbm) frequency (ghz) 0 10 20 30 40 50 60 70 579111315 +25c +85c -40c ip2 (dbm) frequency (ghz) 0 10 20 30 40 50 60 70 579111315 +9 dbm +12 dbm +15 dbm +18 dbm +20 dbm ip2 (dbm) frequency (ghz) HMC558LC3B v02.1208 gaas mmic fundamental mixer, 5.5 - 14.0 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 319 absolute maximum ratings rf / if input +25 dbm lo drive +25 dbm channel temperature 150 c continuous pdiss (t = 85 c) (derate 3.25 mw/c above 85 c) 211 mw thermal resistance (channel to ground paddle) 307 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c electrostatic sensitive device observe handling precautions outline drawing notes: 1. package body material: alumina. 2. lead and ground paddle plating: 30-80 microinches gold over 50 microinches minimum nickel. 3. dimensions are in inches (millimeters). 4. lead spacing tolerance is non-cumulative. 5. characters to be helvetica medium, .025 high, black ink, or laser mark located approx. as shown. 6. package warp shall not exceed 0.05mm datum ? c ? 7. all ground leads and ground paddle must be soldered to pcb rf ground. 8. classified as moisture sensitivity level (msl) 1. HMC558LC3B v02.1208 gaas mmic fundamental mixer, 5.5 - 14.0 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 320 pin number function description interface schematic 1, 3, 4, 6, 7, 9 gnd package bottom must also be connected to rf/dc ground. 2lo this pin is dc coupled and matched to 50 ohms. 5if this pin is dc coupled. for applications not requiring opera- tion to dc, this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary if frequency range. for operation to dc, this pin must not source or sink more than 2 ma of current or part non-function and possible part failure will result. 8rf this pin is dc coupled and matched to 50 ohms. 10, 11, 12 n/c no connection required. these pins may be connected to rf/ dc ground without affecting performance. pin descriptions HMC558LC3B v02.1208 gaas mmic fundamental mixer, 5.5 - 14.0 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 321 evaluation pcb item description j1 - j2 sri sma connector j3 johnson sma connector u1 HMC558LC3B mixer pcb [2] 117611 evaluatio n pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: arlon 25 rf the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 109952 [1] HMC558LC3B v02.1208 gaas mmic fundamental mixer, 5.5 - 14.0 ghz
|
